|
Content/Topic
|
PERSONAL ENTREPRENEURIAL COMPETENCIES (PECs)
ENVIRONMENT AND MARKET (EM)
APPLYING APPROPRIATE SEALANT/ADHESIVE (AAS)
MOVING AND POSITIONING VEHICLE (MPV)
PERFORMING MEASUREMENT AND CALCULATION (PMC)
READING, INTERPRETING, AND APPLYING SPECIFICATION AND MANUAL (RIA)
USING AND APPLYING LUBRICANT/COOLANT (UAL)
PERFORMING SHOP MAINTENANCE (PSM)
PREPARING JOB ESTIMATE/COSTING (PJE)
INTERPRETING/DRAWING TECHNICAL DRAWING (ITD)
PRACTICING HEALTH, SAFETY, AND ENVIRONMENT PROCEDURES (PHSE)
INSPECTING TECHNICAL QUALITY OF WORK (ITQ)
MAINTAINING QUALITY SYSTEM (MQS)
IDENTIFYING AND SELECTING ORIGINAL AUTOMOTIVE PARTS AND PRODUCTS (ISOA)
PERFORMING GAS ENGINE TUNE UP (PGET)
PERFORMING DIESEL ENGINE TUNE UP (PDET)
REMOVING AND REPLACING ELECTRICAL/ELECTRONICS UNITS/ASSEMBLIES (RREE)
REMOVING AND TAGGING ENGINE SYSTEM COMPONENTS (RTES)
REMOVING AND TAGGING STEERING, SUSPENSION AND BRAKE SYSTEM COMPONENTS (RSSB)
REMOVING AND TAGGING TRANSMISSION SYSTEM COMPONENTS (RTTS)
|
|
Competencies
|
Lo 1. recognize personal entrepreneurial
competencies and skills (pecs) needed in
automotive servicing
Lo 2. develop and strengthen personal
competencies and skills (pecs) needed in
automotive servicing
Lo 1. recognize and understand the
market in automotive servicing
Lo 2. recognize the potential customer/
market in automotive servicing
Lo 3. create new business ideas in
automotive servicing by using various
techniques
Lo 4. develop a product/service in
automotive servicing
Lo 5. select a business idea based on the
criteria and techniques set
Lo 6. develop a brand for the product
Lo 1. identify appropriate
sealant/adhesive
Lo 2. prepare surface for sealant/
adhesive application
Lo 3. apply sealant/adhesive evenly
Lo 4. store unused and dispose of used
sealant/adhesive
Lo 1. prepare the vehicle for driving
Lo 2. move and position vehicle
Lo 3. check the vehicle
Lo 1. select measuring instrument
Lo 2. carry out measurement and
calculation
Lo 3. maintain measuring instrument
Lo 1. identify and access manual/
specifications
Lo 2. interpret manuals
Lo 3. apply information accessed in the
manual
Lo 4. store manual
Lo 1. identify types of lubricants/coolant
Lo 2. use and apply lubricants/coolant
Lo 3. perform housekeeping activities
Lo 3. perform housekeeping activities
Lo 1. inspect and clean tools, equipment
and work area
Lo 2. store/arrange tools and shop
equipment
Lo 3. dispose of waste and used
lubricants
Lo 4. report damaged tools/equipment
Lo 1. identify the nature and scope of
work
Lo 2. prepare and present
estimate/costing
Lo 1. interpret technical drawing
Lo 2. select correct technical drawing
Lo 3. apply freehand sketching
Lo 1. apply basic safety procedures
Lo 2. apply emergency procedures
Lo 1. gather information to carry out
inspection
Lo 2. inspect and apply quality standards
to work
Lo 3. achieve quality work outcomes
Lo 1. conduct final quality checks on
completed work/order
Lo 2. report on the quality of processes
and work outcome
Lo 3. implement improvement to work
processes
Lo 1. identify the part/product and its
end use
Lo 2. identify details of the part/product
Lo 3. part/product is supplied or ordered
for customers
Lo 4. review personal training
performance and finalize documentation
Lo 1. inspect/test spark plug
Lo 2. check/replace fuel filter and air
cleaner
Lo 3. inspect/replace contact point
condenser
Lo 4. test/ adjust dwell angle and
ignition setting
Lo 5. adjust engine idle speed and
mixture
Lo 6. check advance mechanism and
adjust ignition timng
Lo 7. perform compression testing
Lo 1. set injection timing
Lo 2. install injection pump
Lo 3. inspect injection timing
Lo 4. bleed injection system
components
Lo 5. conduct compression testing
Lo 1. prepare for work
Lo 2 remove electrical /electronic units
assemblies
Lo 3. replace electrical/electronic
units/assemblies
Lo 4. clean up work area and maintain
equipment
Lo 1. prepare to remove and tag engine
system components
Lo 2. remove engine system
components
Lo 3. tag engine system components
Lo 1. prepare to remove and tag
steering, suspension, and brake system
components
Lo 2.remove steering, suspension and
brake system components.
Lo 3. tag steering, suspension, and brake
system components
Lo 1.prepare to remove and tag
transmission components
Lo 2. remove transmission system
components
Lo 3.tag transmission components
|
