|
Competencies
|
Lo 1. recognize personal entrepreneurial
competencies and skills (pecs) needed
in motorcycle/small engine servicing
Lo 1. generate a business idea that
relates with a career choice in
motorcycle/small engine servicing
Lo 1. identify appropriate
sealant/adhesive
Lo 2. prepare surface for sealant/
adhesive application
Lo 3. apply sealant/adhesive evenly
Lo 4. store unused and dispose used
sealant/adhesive.
Lo 1. prepare the vehicle for driving.
Lo 2. move and position vehicle.
Lo 3. check the vehicle.
Lo 1. select measuring instrument
Lo 2. carry out measurement and
calculation
Lo 3. maintain measuring instrument.
Lo 1. identify and access manual/
specifications.
Lo 2. interpret manuals
Lo 3. apply information accessed in the
manual.
Lo 4. store manual.
Lo 1. identify types of
lubricants/coolant
Lo 2. use and apply lubricants/coolant
Lo 3. perform housekeeping activities
Lo 1. inspect and clean tools, equipment
and work area.
Lo 2. store/arrange tools and shop
equipment.
Lo 3. dispose waste and used lubricants.
Lo 4. report damaged tools/equipment
Lo 1. adjust/replace throttle cable/choke
cable.
Lo 2.replace gasoline fuel filter
Lo 3. drain gasoline fuel tank.
Lo 4. replace fuel control valve
Lo 5. clean fuel tank/filter
Lo 6. inspect/ replace fuel lines.
Lo 7. inspect/ replace fuel pump
Lo 8. inspect air cleaner assembly.
Lo 9. inspect turbo system
Lo 10. inspect fuel injection system
Lo 1. inspect engine oil level
Lo 2. check oil pump.
Lo 3. check oil lines and cables.
Lo 4. check 2t oil pump
Lo 5. check oil filter.
Lo 6. replace oil filter
Lo 7. inspect oil cooler system
Lo 8. check oil pressure.
Lo 1. check/adjust/replace spark plug
Lo 2. check/replace ignition coil.
Lo 3. inspect/adjust contact
point/condenser.
Lo 4. adjust ignition timing
Lo 5. diagnose c.d.i. magneto/c.d.i.
battery
Lo 6. adjust mechanical advancer
Lo 1. inspect muffler
Lo 2. repair muffler dents.
Lo 3. check muffler clamp gasket and
connector.
Lo 4. clean exhaust canister
Lo 5. clean exhaust baffle pipe
Lo 6. check electronic / mechanical
power valve
Lo 7. check smoke emission.
Lo 1. check suspension play.
Lo 2. check swing arm
Lo 3. inspect front fork inner/outer tube
Lo 4. adjust suspension
Lo 5. inspect suspension linkage (lower
and upper).
Lo 6. overhaul front fork
Lo 1. inspect motorcycle brake system
components.
Lo 2. carry-out adjustment and repair.
Lo 3. diagnose abs system
Lo 4. perform final road test.
Lo 1. inspect tire condition.
Lo 2. check rim lock
Lo 3. check wheel bearings/ hub damper.
Lo 4. check spoke tension.
Lo 5. perform wheel alignment.
Lo 6. perform wheel balancing
Lo 1. inspect/adjust clutch cable/push
rod
Lo 2. adjust clutch lever free play
Lo 3. check centrifugal shoe/drum.
Lo 4. repair clutch master cylinder
Lo 5. repair clutch secondary cylinder.
Lo 6. lubricate clutch release screw
assembly
Lo 7. perform clutch overhauling.
Lo 8. check gear backlash.
Lo 1. check fuses.
Lo 2. check battery
Lo 3. check lighting system/warning
devices.
Lo 4. check wiring continuity/insulation
Lo 5. check starting system.
Lo 6. check charging system and replace
components
Lo 7. check switches/coupler
Lo 8. inspect warning devices.
Lo 9. inspect safety wiring / relay /
accessories
Lo 10. check speedometer / tachometer
and engine sensors, fuel gauges unit.
Lo 1. inspect/check final drive
component.
Lo 2. carry out diagnostic procedure
Lo 1. inspect, check and service cooling
system components.
Lo 2. diagnose faults from symptoms and
decide preferred action
Lo 3. repair cooling system components
Lo 1. disconnect/attach components of
engine
Lo 2. pull-out engine
Lo 3. disassemble engine
Lo 4. install engine.
Lo 5. repair/replace engine parts
Lo 6. inspect transmission components
Lo 7. repair/replace transmission
components.
Lo 8. reassemble engine
Lo 9. connect external accessories of
engine.
Lo 10. test engine performance
|
