|
Competencies
|
Lo 1. develop and strengthen personal
competencies and skills (pecs) needed in
automotive servicing.
Lo 1. develop a product service
in automotive servicing.
Lo 2. select a business idea based on the
criteria and techniques set.
Lo 3. develop a brand for the
product
Lo 1. explain the operation and safe
handling of different types of batteries
Lo 2. demonstrate the testing of an
automotive battery
Lo 3. demonstrate the procedure in
removing and replacing batteries.
Lo 4. demonstrate the procedures in
servicing the battery
Lo 5. demonstrate the procedures in
jump starting.
Lo 1. explain the function of ignition
system components
Lo 2. check ignition coil, ballast resistor
and high-tension cable resistance
Lo 3. check distributor assembly
Lo 1. explain the principle of auto
electricity.
Lo 2. explain automotive lighting system
and its functions
Lo 3. install wiring/lighting system.
Lo 4. test electrical system and
determine preferred action.
Lo 5. carry out necessary repair in the
electrical system.
Lo 1. test starting system components
and identify faults.
Lo 2. disassemble starter
Lo3. repair/replace and assemble starter
components/parts
Lo 1. test charging system component
and identify faults
Lo 2. disassemble alternator
Lo 3. repair/replace and assemble
alternator components/parts.
Lo 1. explain coolant circulation within
cooling system
Lo 2. check thermostat condition.
Lo3. perform leakage test on cooling
system.
Lo 4. repair/replace water pump
Lo 5. apply coolant additives
Lo1. explain the oil cycle within the
engine
Lo2. identify types, classifications and
applications of engine oil.
Lo3.overhaul oil pump, replace oil filter
and change oil
Lo1.explain fuel octane rating
Lo2. identify fuel pump types and
classification.
Lo3. perform carburetor adjustment.
Lo 4. overhaul carburetor.
Lo 1. check turbocharger operation
Lo 2. overhaul turbo charger
Lo 1. overhaul diesel fuel injector
Lo 2. calibrate and install diesel fuel
injector
Lo 1. diagnose clutch failure/problem
Lo 2. pull out and mount clutch
component parts.
Lo3. dismantle/install clutch mechanism.
Lo 4. overhaul hydraulic clutch
mechanism.
Lo 5. perform clutch parts failure
analysis.
Lo 6. set/adjust clutch system
component
Lo 7. bleed clutch hydraulic system
Lo 1. diagnose manual transmission
failure.
Lo 2. pull-out and mount manual
transmission.
Lo3. disassemble/assemble manual
transmission.
Lo4. inspect manual transmission parts
Lo 5. test manual transmission
Lo 6. road-test manual transmission.
Lo1. inspect drive shaft and joint.
Lo2. dismount and mount differential
assembly
Lo3. overhaul differential.
Lo4. overhaul rear/front wheel hub.
Lo5. analyze king pin condition
Lo6. inspect/replace i-beam.
Lo 1. analyze front end geometry failure
Lo 2. service steering system
Lo 3. perform wheel balancing
Lo 4. conduct wheel alignment.
Lo 1. perform brake system preventive
maintenance.
Lo2. diagnose brake system failure.
Lo 1. identify the types of hydraulic brake
(hydraulic abs) and its corresponding
component and function.
Lo 2. explain the operating principle of
abs equipped brake.
Lo3. interpret schematic diagram and
circuitry.
Lo 4. perform abs component testing
Lo 1. pull-out/mount brake system
components
Lo2. disassemble/assemble brake system
components.
Lo 3. conduct road test.
Lo1. diagnose suspension system failure.
Lo2. dismount/mount suspension
component parts.
Lo3. disassemble/assemble suspension
parts
Lo4. inspect/replace suspension
component parts
Lo 1. check clutch and brake fluid and
lines.
Lo 1.2 inspect/bleed brake and clutch
system.
Lo 2. inspect and change
transmission/differential gear oil.
Lo 3. inspect/replace power steering
fluid
Lo 4. check/refill automatic transmission
fluid.
Lo 5. check tire and tire pressure.
|
